Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
User Manual
LP
2.0A
Number
Elapsed
of
time
cells
Charging
current
'FAST' CHARGING OF LITHIUM BATTERY
Charging current will drop towards the end of charging, a specific CV
process is reduced to the charging process earlier. In fact, the
charging current reach 1/5 when the charging process comes to 1/10
during CV period, charging capacity is a little smaller than normal
charging but charging time is shorted accordingly.
-
+
DEC. INC.
Batt type
Stop
44
Start
Enter
00757
Battery
Charged
voltage
capacity
-
+
DEC. INC.
Start
>3 seconds
Enter
MODSTER Charger 60
If both numbers are identical you can start
charging process. If not, press BATT TYPE/
STOP button to go back to previous screen
to recheck the number of cells of the
battery pack before going ahead.
This screen shows the real-time status
during charge process. Press BATT TYPE/
STOP button once to stop the charge
process.
The value on the left side of the second
lines shows the charge current. The value
on the right side of the second lines shows
the battery pack's voltage. After setting
current and voltage, press the START/
ENTER button for more than 3 seconds to
start the process.
This displays the number of cells you set
up and the processor detects.
R=Number of cells detected by charger.
S=Number of cells set by you at the
previous screen.
www.modster.at
Werbung
Inhaltsverzeichnis
