Saeco IDEA RST Bedienung Und Wartung Seite 90

English
8.2.3 Description of Messages in the Programming Menu
GENERAL SETTING
OPTION DISPLAY
NO.
1 Language
ITALIANO
DEUTSCH
ENGLISH
FRANÇAIS
ESPAGNOL
PORTUGUES
NEDERLANDS
한국어
Polski
2 CUP WARMING SURFACE %
0....100%
3 Clock
3.1. Time
3.2. Date
3.3. FORMAT
4 On/Off time
4.1. Automatic start-up
Deact.
Act.
4.2. ON TIME 1
4.3. OFF TIME 1
4.4. ON TIME 2
4.5. OFF TIME 2
4.6. ON TIME 3
4.7. OFF TIME 3
4.8. ON TIME 4
4.9. OFF TIME 4
5 Display Backlight
20....100%
6 MESSAGES
6.1. SERVICE MESSAGE
6.2. DESCALING MESSAGE
7 User Password
Beverage set-up
OPTION
DISPLAY
NO.
90
Description
Press "OK" from the "LANGUAGE" menu to select the language.
(except for DUO model)
This function allows you to activate the cup warming surface by adjusting it from 0 to 100%
at intervals of 10.
This function allows setting the machine clock and calendar.
dd.mm.yyyy or mm.dd.yyyy
This function allows programming the automatic switch on and off times of the machine over
a whole week.
It activates and deactivates the automatic switch on
MTWTFSS hour minute
Confirm "ON/OFF TIME" and use the "Down" and "Up" button to move on the days of
the week, hour and minute.
Once the cursor is positioned on the days of the week, press OK to enter the edit
mode.
Press the "Down" and "Up" button to select the day to be changed.
Press the OK button to activate (day letter underlined) or deactivate (letter not underlined)
the day.
Press the "Menu/ESC" button to confirm and quit the edit mode for the days of the
week.
Once the cursor is positioned on the hours or minutes, press OK to enter the edit
mode.
Press the "Down" and "Up" button to edit the value.
Press the "Menu/ESC" or "OK" button to confirm and quit the edit mode for the days of
the week.
This function allows you to adjust the display backlighting from 20 to 100%.
It allows to change the phone number to contact.
Press OK to enter the message.
Press the UP or DOWN buttons to select a number or the space.
Press OK to confirm and move on to the following box.
Press ESC to confirm and exit.
It allows changing the user password.
The pre-set password is 0000
Press the UP or DOWN buttons to select a code number.
Press OK to confirm and move on to the following box.
Press ESC to confirm and exit.
Contact the authorised service centre in case you forgot the password.
Description