Unpacking And Positioning - Saeco IDEA RST Bedienung Und Wartung

English
If the appliance needs to be positioned close to a wall, it is
necessary to leave a space of at least 8 cm between the
appliance's back and the wall, in order to make sure that
the air outlet grill at the back of the appliance is
unobstructed.
5.2

Unpacking and Positioning

On receipt of the appliance, make sure that it has not
suffered any damage during transport or that the packaging
has not been unduly opened with consequent stealing of
the components contained in it.
If damage of any kind is found, the courier must be
informed and notice must be immediately given to the
importer or to the seller.
If these are not in the purchaser's country, please contact
the manufacturing company directly.
A bag called "ACCESSORY BOX" is supplied with the
appliance. It contains the following items:
• Instruction manual.
• Screws and plates.
SA Accessory box
Lift the pallet in order to remove the fixing screws. Screw
the 4 supporting feet.
76
A Fixing screws
B supporting feet
Check that the surface where the appliance shall be
positioned is steady.
Drill a hole with a 100 mm Ø on the surface.
A 100 mm Ø hole
B Ideal position of the adjustable feet
Definitely place the machine on the supporting surface.
Install the appliance on the surface and level it by adjusting
the height of the feet.