Programming And Maintenance Menu; Description Of Buttons For Programming Phases - Saeco IDEA RST Bedienung Und Wartung

English
8

PROGRAMMING AND MAINTENANCE MENU

This chapter
instructions on how to set
and change
programming
of the appliance.
Therefore it is necessary to
carefully read it and to
understand
sequence
before performing them.
8.1 Description of Buttons for
Programming Phases
Use the buttons described below to scroll the appliance
menus.
During programming the
following buttons have a
different function than the
one they
during machine use.
86
contains
the
parameters
the exact
of operations
usually have
Some functions also enable to program one or more data
(already programmed on standard values).
BUTTON Description
Go back to the previous option inside
1 Up
the same programming level;
Increase the value of a datum to be
changed.
Go on to the following option inside
2 Down
the same programming level;
Decrease the value of the datum to
be changed.
3 OK Move from a menu level to
another one;
Prepare a datum for the change;
Confirm a datum or a function.
4 Menu/Esc Enter the programming menu;
Confirm the changes and go
back to the previous menu level
until exiting the menu.
To adjust the data values to be re-programmed:
• Select the function.
• Confirm the function with the "OK" button.
The cursor moves under the value to be changed.
• Press the "Up" or "Down" buttons to change its value.
• Confirm the modified datum with the "OK" or "Esc" button.
FUNCTION