Saeco IDEA RST Bedienung Und Wartung Seite 63

Before connecting
appliance to the water
mains, please read and
follow the
regulations in force in your
country.
If the power cord is
damaged, it
replaced
manufacturer, its service
centre or by adequately
qualified personnel
order to avoid any risks.
It is recommended the
installation of a residual
current device (RCD) with
a rated residual current not
exceeding 30 mA.
Connect the appliance to a
drinking water main with
pressure between
MPA and 0.8 MPA (1.5
and 8 bar); see data on the
data plate.
the
applicable
must be
by the
in
0.15
In case of filling tube
replacement, use the new
set of tubes supplied with
the appliance. Do not use
the old set anymore.
Access to the internal area
is restricted to persons
having knowledge
practical experience of the
appliance, in particular as
far as safety and hygiene
are concerned.
Never clean the internal area of
the machine with power supply
on or with the plug connected.
In any event do not use water
jets or detergents.
English
and
63