Disposal; Packaging; Troubleshooting - Silvercrest SNM 700 A1 Bedienungsanleitung

9. Disposal

This product is subject to the
provisions of European Direc-
tive 2012/19/EC. The sym-
bol showing a wheelie bin
crossed through indicates
that the product requires sep-
arate refuse collection in the European Un-
ion. This applies to the product and all
accessories marked with this symbol. Prod-
ucts identified with this symbol may not be
discarded with normal household waste, but
must be taken to a collection point for recy-
cling electric and electronic appliances.
This recycling symbol marks
e.g. an object or parts of the
material as valuable for recy-
cling. Recycling helps to re-
duce the consumption of raw
materials and protect the environment.

Packaging

When disposing of the packaging, make
sure you comply with the environmental reg-
ulations applicable in your country.
10 GB

10. Troubleshooting

If your device fails to function as required,
please try this checklist first. Perhaps there is
only a minor problem, and you can solve it
yourself.
DANGER! Risk of electric
shock!
Do not attempt to repair the device your-
self under any circumstances.
Fault
• Has the device been
• Check the connection.
• Has the blender jug 5
No function
• Has the overheating
Blade of the • Switch off immediate-
blade attach-
ment 8/9 not
turning or turn-
ing with diffi-
culty
• Is the quantity of ingre-
Liquids are run-
• Is the blade attach-
ning out
Possible causes /
Action
connected to the pow-
er supply?
- 7 been engaged
properly?
protection switched off
the device? (see
"Overheating protec-
tion" on page 8)
ly, pull out mains
plug 4 and check:
Is there any obstacle in
the blender jug 5 - 7?
dients filled into the
blender jug too large?
ment 8/9 firmly
screwed onto the
blender jug 5 - 7?