Slx-4 / Slx - Optika SLX Serie Bedienungsanleitung

6. Remove the eyepieces dust caps and insert the
eyepieces in the empty eyepiece sleeve. (Fig. 5)
7. Connect the jack of the power supply to the sock-
et in the rear part of the microscope base. (Fig. 6)

7.5.2 SLX-4 / SLX-5

1. Screw the pillar on the base. (Fig. 7)
2. Tighten the screw to lock the pillar. (Fig. 8)
Page 11
Fig. 5
Fig. 6
Fig. 7
Fig. 8