Package Content - Unify CP200T Installations- Und Kurzanleitung

Documentation on Internet
This and other documentation can be found on the Internet at:
http://www.unify.com
mation about firmware updates, frequently asked questions and lots
more can be found on the web at:
http://wiki.unify.com

Package Content

a OpenScape Desk Phone CP200T
b Stand
c Handset
d Handset cable
e Installation and Quick Reference Guide
Notes about Place of Use
• Operation of a telephone is only permitted with indoor cabling.
• The telephone should be operated in a controlled environment
with an ambient temperature between 5 °C and 40 °C (41 °F and
104 °F).
• Do not install the telephone in a room where large quantities of
dust accumulate; this can considerably reduce the service life of
the telephone.
• Do not expose the telephone to direct sunlight or any other source
of heat, as this is liable to damage the electronic equipment and
the plastic casing.
• Do not operate the telephone in damp environments such as
bathrooms.
Connect the Handset to the Telephone
See also overview on page 2.
1. Insert the plug on the long end of the handset cable d into the
jack
D
the groove provided.
2. Insert the plug on the short end of the handset cable d into the
jack on the handset c .
8
 Support.Technical notes, current infor-
a
c
on the base of the telephone and press the cable into
b
d e