Package Content - Unify Atos OpenScape Desk Phone CP400T Installations- Und Kurzanleitung

Documentation on Internet
This and other documentation can be found on the Internet at:
http://www.unify.com
Technical notes, current information about firmware updates, fre-
quently asked questions and lots more can be found on the web at:
http://wiki.unify.com

Package Content

OpenScape Desk Phone CP400T
Stand
Handset
Handset cable
Installation and Quick Reference Guide
Notes about Place of Use
• Operation of a telephone is only permitted with indoor ca-
bling.
• The telephone should be operated in a controlled environ-
ment with an ambient temperature between 5 °C and 40
°C (41 °F and 104 °F).
• Do not install the telephone in a room where large quanti-
ties of dust accumulate; this can considerably reduce the
service life of the telephone.
• Do not expose the telephone to direct sunlight or any other
source of heat, as this is liable to damage the electronic
equipment and the plastic casing.
• Do not operate the telephone in damp environments such
as bathrooms.
Connect the Handset to the Telephone
See also overview on page 2.
1. Insert the plug on the long end of the handset cable
into the jack
the cable into the groove provided.
2. Insert the plug on the short end of the handset cable
into the jack on the handset
8
 Support.
on the base of the telephone and press
C
.