What To Do If - IKEA FRAMTID Bedienungsanleitung

ENGLISH
1
Pull the rails away
from the oven wall at
the front.
To put the side rails back, follow the instruction
in reverse.
Important! The rounded ends of the guide
bars must point to the front.
Pyrolytic cleaning
Warning! The oven becomes very hot
during Pyrolytic cleaning! Risk of burns!
1. Remove from the oven all removable parts,
including the side rails and the meat probe.
2. Remove the worst residue manually.
3. Turn the oven function control knob to Py-
rolytic cleaning function
flashes on the display.
4. Push Pyrolytic cleaning button
firm.
5. Pyrolytic cleaning starts and
mains on the display.

What to do if...

Problem
The oven does not op-
erate
The oven does not op-
erate
The temperature indica-
tor does not come on
The oven lamp is not
working
2
2
1
Then unhook the rails
at the back.
.
to con-
Possible cause
The required setting have not
been set
The appliance is not correctly
connected or/and the mains
supply to the oven is not on
The required setting have not
been set
The oven lamp bulb is faulty
Pyrolytic cleaning process takes 2h 45
min. Do not open the door before the
process is completed. This will abort the proc-
ess.
To prevent from risk of burns, when the
oven reaches a certain temperature, the
door is automatically locked.
When the oven cools down, the door is auto-
matically unlocked.
Changing the oven lamp and cleaning the
glass cover
Warning! Before you change the oven
lamp (refer to "Product description"),
switch off the appliance and disconnect it from
the electrical supply.
1. Turn the glass cover anti - clockwise and
remove it. Clean the glass cover.
2. If necessary, replace the old oven lamp
with a 40 watt, 230V (50Hz), 300 °C heat
resistant oven lamp (Connection type:
E14).
re-
3. Refit the glass cover.
Check if cooking function and
temperature are selected
Check if the appliance is correctly
connected and the mains supply
to the oven is on
Select the cooking function and
temperature
Replace the oven lamp
14
Solution