Kenwood FP270 Serie Bedienungsanleitung Seite 6

6 Reverse the above procedure to remove the lid, attachments and
bowl.
Always switch off before removing the lid.
G
important
Your processor bowl is not suitable for crushing or grinding
G
coffee beans, or converting granulated sugar to caster sugar.
When adding almond essence or flavouring to mixtures avoid
G
contact with the plastic as this may result in permanent marking.
to use your liquidiser
1 Fit the sealing ring into the blade unit
located correctly. Leaking will occur if the seal is
damaged or not fitted correctly.
2 Screw the goblet onto the blade assembly
The liquidiser will not work if incorrectly assembled.
3 Put your ingredients into the jug.
4 Fit the lid to the goblet and push down to secure
cap.
5 Place the liquidiser onto the power unit and turn clockwise to
lock .
6 Select a speed or use the pulse control.
safety
Liquids should be allowed to cool to room
G
temperature before blending.
Always take care when handling the blade assembly and avoid
G
touching the cutting edge of the blades when cleaning.
Only operate the liquidiser with the lid in place.
G
Only use the goblet with the blade assembly supplied.
G
Never run the liquidiser empty.
G
To ensure the long life of your liquidiser, do not run it for longer
G
than 60 seconds.
Smoothie recipes - never blend frozen ingredients that have
G
formed a solid mass during freezing, break it up before adding to
the goblet.
hints
When making mayonnaise, put all the ingredients, except the oil,
G
into the liquidiser. Remove the filler cap. Then, with the appliance
running, add the oil slowly through the hole in the lid.
Thick mixtures, e.g. pâtés and dips, may need scraping down. If
G
the mixture is difficult to process, add more liquid.
Ice crushing - operate the pulse in short bursts until crushed to the
G
desired consistency.
The processing of spices is not recommended as they may
G
damage the plastic parts.
The appliance will not work if the liquidiser is incorrectly fitted.
G
G To blend dry ingredients - cut into pieces, remove the filler cap,
then with the appliance running, drop the pieces down one by
one. Keep your hand over the opening. For best results empty
regularly.
G Don't use the liquidiser as a storage container. Keep it empty
before and after use.
Never blend more than 1.2 litres - less for frothy liquids like
G
milkshakes.
- ensuring the seal is
.
. Fit the filler
3
to use your mill
Use the mill for milling herbs, nuts and coffee beans.
1 Put the ingredients into the jar
2 Fit the sealing ring into the blade unit
3 Turn the blade unit upside down. Lower it into the jar, blades
down.
4 Screw the blade unit onto the jar until finger tight
5 Place the mill onto the power unit and turn clockwise to lock
6 Switch onto maximum speed or use the pulse control.
safety
Never fit the blade unit to your food processor without the jar
G
fitted.
Never unscrew the jar while the mill is fitted to your appliance.
G
Do not touch the sharp blades – Keep the blade unit away from
G
children.
Never remove the mill until the blades have completely stopped.
G
To ensure the long life of your mill, never run for longer than
G
30 seconds. Switch off as soon as you have got the right
consistency.
The processing of spices is not recommended as they may
G
damage the plastic parts.
The appliance will not work if the mill is incorrectly fitted.
G
Use for dry ingredients only.
G
hints
Herbs are best milled when clean and dry.
.
.
.
.