Additional Information; Switching The Door Open Sensor On/Off; Switching The Open/Close Beep On/Off - Pioneer PDRF10 Bedienungsanleitung

7 Additional Information

Switching the door
open sensor on/off
The door open sensor on the front of the CD
recorder has three operating modes, as well as
an off setting.
1 Switch the unit into standby.
2 Press SYSTEM MENU and select
SENSOR MODE.
Remember: switch between menu options
using 4 and ¢; select the option by
pressing
SET
Use 4 or ¢ to select MODE
3
1, MODE 2 or OFF as required.
• SNSR MODE 1 – (default) the door
will open automatically, even if a disc is
currently playing.
• SNSR MODE 2 – the door will only
open automatically if no disc is playing.
• SNSR OFF – switches off the
automatic door feature.
4 Press SET.
The system goes back into standby.
Note: The disc compartment options also
affect the settings of the main unit. They
cannot be set independently.
34
En
.
Switching the open/
close beep on/off
By default, when you press
open or close the disc compartment, you'll
hear a beep. If you would prefer not to, here's
how to switch it off:
1 Switch the unit into standby.
2 Press SYSTEM MENU and select
BEEP MODE.
Remember: switch between menu options
using 4 and ¢; select the option by
pressing .
SET
Use 4 or ¢ to select BEEP
3
ON or BEEP OFF as required.
4 Press SET.
The system goes back into standby.
Note: The disc compartment options also
affect the settings of the main unit. They
cannot be set independently.
/ to
OPEN CLOSE