Connection With The Mains; Operation; Infrared (Ir) Remote Control - EuroLite LED MCL 420 Master Bedienungsanleitung

Connection with the mains

The electric connection must only be carried out by a qualified electrician!
The occupation of the connection-cables is as follows:
Cable Pin
Brown Live
Blue Neutral
Yellow/Green Earth
The earth has to be connected!
Connect the device to the mains with the power-plug.
If the device will be directly connected with the local power supply network, a disconnection switch with a
minimum opening of 3 mm at every pole has to be included in the permanent electrical installation.

OPERATION

Connect the connection cable-end with phone jack RJ11 with the corresponding socket of the LED MCL
420/600 Slave devices.
Attention: This device can be used with up to 8 LED MCL 420/600 Slave devices. Max. distance between

Infrared (IR) Remote Control

DANGER TO LIFE!
International
L
N
the LED disks is 2.5 m.
With the Remote Control POWER-switch, you can switch the device on and
off. A short white flash signalizes that the LED disk is on.
You may choose from 4 functions: MODE, WHITE, SPEED+/-, and FIX with
the IR Remote Control
Select the desired mode with the MODE-button.
Mode:
Color Wash
Color Jump
Switch-on/Fade-out
Rainbow Color Chasing
Feature:
9 colors
9 colors
9 colors
12 colors
15/30 51931000_V_1_0.DOC