Sony XAV-7W Bedienungsanleitung Seite 36

Sound Settings
Tip
Pressing EQ7 for more than 2 seconds
displays the EQ7 tune setting instead of
executing steps 2 - 4.
Notes
• When "EQ off" is selected, the
••
equalizer curve cannot be adjusted.
• The following figure on the monitor
does not change when the EQ7 tune
setting is changed.
Tip
The level adjustment range is ±10 dB.
36
Storing a personalized equalizer curve
Follow the steps below with the card remote commander
while the monitor is open.
1
Select the source (CD, MD, radio, etc.) for
which you want to use the equalizer.
2
Press MENU.
3
Press V or v to select "EQ7 Tune".
E Q 7 T u n e
4
Press ENTER.
5
Press B or b (or the EQ7 button) to select an
equalizer curve.
E Q 7 T u n e
6
Press ENTER.
7
Press B or b to select the frequency.
With each press of the button, the unit cycles through the
frequencies in the following order:
62 Hz 157 Hz
16 kHz
8
Press V or v to adjust the level.
Repeat steps 7 and 8 to adjust the equalizer curve.
9
Press MENU twice.
The regular display appears again.
To return the equalizer curve to the factory default setting
Hold down ENTER in step 7 or 8 for at least 2 seconds.
V o c a l
396 Hz 1.0 kHz
6.3 kHz 2.5 kHz