Before Use; Charging The Battery; Using The Headphones - Silvercrest SBKP 1 A1 Bedienungs- Und Sicherheitshinweise

If rechargeable batteries have leaked, avoid contact with skin,
eyes and mucous membranes with the chemicals! Flush immedi-
ately the affected areas with fresh water and seek medical
attention!
Do not cover the product during operation or charging. Otherwise the
product can overheat.
This product contains a rechargeable battery, which can lead to fire,
explosion or leakage of hazardous substances in case of incorrect appli-
cation.

Before use

Before use, verify the package contents are complete and undamaged!

Charging the battery

The battery must be charged prior to first use.
The LED will flash red and headphones sound acoustic signal when the
2
battery is drained. The battery should then be charged as soon as possible.
Plug the micro-USB plug
charging socket
7
charging cable into the USB port on a PC or a USB adapter (not included).
Note: The LED will remain red whilst charging. Once the battery is fully
charged, the LED will remain blue.
Once charging has completed, remove the micro-USB plug from the head-
phones.

Using the headphones

Connect the headphones with a communication device.
Place the headphones near a switched on communication device (e.g.
mobile or computer).
on the charging cable into the micro-USB
12
on the headphones! Plug the USB plug on the
13
GB/IE 29