Pairing Your Audio Device; Pairing Your Remote Ptt - Motorola OPERATIONS CRITICAL WIRELESS Bedienungsanleitung

• Connecting Multiple Devices: Depending on the host,
user may have to connect the audio device first.
• Volume: Depending on the host, your wireless device may
have localized volume control or volume control that is in
sync with the radio.
Note: If you are unsure whether your device supports wireless
functionality, or to get more information on the host features,
please refer to the respective host manual.

PAIRING YOUR AUDIO DEVICE

First time connection steps:
1. Verify that both the host and the wireless device are
powered ON (First time only: Once the wireless device is
powered ON, if not previously selected, the wireless device
will instruct the user to select language or tone, and then it
goes into Pairing Mode automatically.)
2. Both the wireless device and wireless host must be within
pairing range (recommended pairing range is within 1
meter).
3. Once the devices are paired successfully, a ring indication
is played on the audio device.
4. Press the MFB button on the wireless device to start the
connection process.
5. Wireless Link Connected with Host indication is provided
upon successful link establishment (refer to Table 3 on
page 9).
6. Your wireless device is now ready to be used.

PAIRING YOUR REMOTE PTT

First time connection steps:
Figure 2: Remote PTT
8