Subsequent Connection - Motorola OPERATIONS CRITICAL WIRELESS Bedienungsanleitung

1. Ensure that device and host are in pairing mode.
2. Both the wireless device and wireless host must be within
pairing range (recommended pairing range is within 1
meter).
3. Wireless Link Connected with Host indication is provided
upon successful link establishment (refer to Table 3 on
page 9).
Note:Please refer to the host manual to put the host in pairing
mode.

SUBSEQUENT CONNECTION

Same Host:
If the Bluetooth link is lost, connection will be automatically
reestablished when the host and device come within 30 meter
range.
New Host:
1. Put the wireless device in Pairing Mode by powering ON
while pressing PTT Button simultaneously.
2. Follow steps from Pairing Your Audio / Remote PTT Device.
State
Entered
Pairing Mode
Not Paired
Paired Blue LED Solid for 2
Successfully
Wireless Link
Connected
with Host
Table 3: Wireless Link and Pairing Indicators
LED Indication
(Audio and
Standalone PTT
Device)
Blue LED Blinking
Blue LED Blinking
seconds
Blue LED
Heartbeat: Long
OFF and Short ON
Tone
Indication
(Audio Device)
–
Pairing Ready
Tone
Pairing
Successful
Tone
Connected
Tone
9
Voice
Prompt
(Audio Device)
"Pairing
Cleared"
"Searching
For Host"
–
"Headset
Connected"