Recording - Yamaha RX-V340RDS Bedienungsanleitung

Recording adjustments and other operations are
performed on other recording components. Refer to the
operation instructions for these components for details on
their operation .
STANDBY
/ON
SILENT SPEAKERS
STEREO PROGRAM A/B/C/D/E
ON A
OFF B
EFFECT NEXT
PHONES
DVD D-TV/CBL VCR
2
CD MD/CD-R V-AUX 6CH IN
TUNER
/DTS 6.1/5.1 NIGHT
1
Turn on the power of this unit and all
connected components.
2
Select the source component you want to
record from.
INPUT
Front panel
3
Start playback (or select a broadcast station)
on the source component.
4
Start recording on the recording component.
38

RECORDING

VOLUME
PRESET/TUNING FM/AM
EDIT
TUNING MODE MEMORY
AUTO/MAN`L MONO MAN`L/AUTO FM
INPUT MODE
PRESET/TUNING CONTROL BASS/TREBLE INPUT
SET MENU
2
POWER
A/B/C/D/E PRESET
SLEEP
DVD D-TV/CBL VCR
CD MD/CD-R V-AUX
or
TUNER
Remote control
Notes
• Do a test recording before you start an actual recording.
• When this unit is set in standby mode, you cannot record
between the components connected to it.
• DSP programs and volume, bass, and treble settings do not
affect the recorded material.
• You cannot record from a source connected to the 6CH
INPUT jacks on this unit.
• Input sources are not output to the same OUT (REC) channel.
(For example, the signal input from VCR IN is not output to
6CH INPUT
VCR OUT.)
• You cannot record audio signals from a source connected to
the DIGITAL INPUT jack on this unit because the signals
from the DIGITAL INPUT jack and analog input jacks are
independent. Please connect a source to the analog in jacks if
you wish to record from the analog out jacks.
• Check the copyright laws in your country if you wish to
record from records, CDs, radio, etc. Recording of
copyrighted material may infringe copyright laws.
If you playback a video source that uses scrambled or
encoded signals to prevent it from being dubbed, the
picture itself may be disturbed due to those signals.
I Special considerations when recording
DTS material
The DTS signal is a digital bitstream. Attempting to
digitally record the DTS bitstream will result in noise
being recorded. Therefore, if you want to use this unit to
record sources that have DTS signals recorded on them,
the following considerations and adjustments need to be
made.
For LDs, DVDs and CDs encoded with DTS, follow the
operating instructions of your player to set it to output an
analog signal, if it is compatible with the DTS format.