THERMEx Integrata Montageanleitung Seite 39

Roof ventilator VDA 180 - 200 - 225 – for roof installation
NB! Electrical installations must be performed by a qualified electrician.
Flat roof:
(1) Attach the roof base to the roof.
(2) Cover and make good (lead flashing or bitumen).
(3) Attach the connection plate, pipe with counter gate and duct connection.
(4) Fix the roof ventilator to the roof base.
Connecting the power
Connect the power cable labelled »motor« from the canopy to an extension cable connected
to a cable from the roof ventilator.
Roof with gradient (max 30°):
(1) Attach the roof base to the roof.
(2) The flaps on the roof base are adjustable in order to be able to form to the roof gradient.
(3-4) Cover and make good (lead flashing, bitumen, or roofing slate).
(5) Attach the connection plate, tube with counter gate and duct connection.
(6) Fix the roof ventilator to the roof base.
Connecting the power
Connect the power cable labelled »motor« from the canopy to an extension cable connected
to a cable from the roof ventilator.
Technical data:
Type
Voltage (V)
Watt consumption
Regulation option
3
Extraction in m /h at 0 vs
Speed in revs per min.
Noise level (dB)
Weight in kg
Ducting size
VDA 180/2
230
260
Incorporated
1370
2900
63
5.5
Ø160/200 mm
VDA 200/4
230
80
Incorporated
1250
1400
53
11.0
Ø200 mm
English
VDA 225/4
230
140
Incorporated
1800
1400
57
12.5
Ø200/250 mm
39