THERMEx Integrata Montageanleitung Seite 34

Integrata
Installation of the ceiling receiver
1
2
A
34
The receiver must be installed in the ceiling in such a way that
the receiver eye is visible. (The eye is where the signal from the
remote control is received). The flat cable must be connected to
the receiver.
The receiver is disassembled (1) and the flat cable is fed through
holes in the ceiling to the location of the receiver. The flat cable
is connected to the receiver. The receiver housing is then
reassembled (2) and mounted on the ceiling fittings. Now the
canopy is ready for operation.
A) Install the ceiling fittings.
B) Connect the flat cable to the receiver.
C) Attach the receiver to the ceiling fittings.
B
The remote control can be placed in
the wall attachment included.
Receiver eye
C