Control Box - THERMEx Integrata Montageanleitung

Control box

Remote control
1. Turning lights on/off:
Press 1 time: Light 2+3
Press 3 times: Light 1+4
2. Turn off motor.
3. Start motor and select speed for ventilator.
(LED displays selected speed).
4. Start/stop turbo function (LED displays when function has been selected).
5. Timer. If this function is selected the motor will stop automatically after 15 minutes.
When the timer is in operation the LED will show in the ceiling receiver.
NB! The LED indicator for cleaning of grease filters is located in the ceiling receiver.
Following a time-span of approx. 30 hours, the LED will indicate that the grease filters must
be cleaned. LED re-set: press and hold the off-button for approx. 15 seconds until the LED
switches off.
Halogen lamps must
be max. 20 W.
Changing the light
Loosen the front glass panel with
a small screwdriver and carefully
pull the light-bulb from its socket
and replace with a new halogen bulb.
Press 2 times: All lights
Press 4 times: Lights off
English
35