Radial Intercom System With Panels - Fermax MDS-CITY Bedienungsanleitung

3.3. Radial Intercom system with Panels

The functionallity of the "hotkeys" keypad is the following:
Po Panel - Guard communication
This key allows to communicate the guard with an intercom panel (station).
Follow these steps to do it:
1. Dial the panel to communicate with.
2. Press the "hotkey" '3' (located below the
In this case, the information provided by the display is different from the previous
ones because it is shown with 3 digits exclusively, this is to say NNN (from 000
to 999). The system will automatically add a 'D' (decoder) before the selected
number indicating that it is a Panel Decoder.
Ecample: if '1' is pressed, followed by the hotkey '3', the Guard Unit will
communicate with the intercom panel 1 and the display will show [ D001/Po].
Door lock releasing
When communicated with a panel, press this key to open the corresponding
door. The LED located besides the key will flash shortly, indicating the door
release action.
RESET Key
The RESET key is located below the door release button (
key will set all the panels in stand-by.
Pag 26
Po key).
). Pressing this