Audio Adjustments; Introduction Of Audio Adjustments - Pioneer KEH-P6020RB Bedienungsanleitung

Section

Audio Adjustments

07

Introduction of audio adjustments

4
5
3
1 display
AUDIO
Shows the audio adjustments status.
2 indicator
LOUD
Appears in the display when loudness is
turned on.
3 indicator
SW
Appears in the display when subwoofer is
turned on.
4 or indicator
F1 F2
The or indicator lights depending on
F1 F2
the setting.
SFEQ
5 indicator
CUSTOM
Appears in the display when equalization is
adjusted.
28
En
1
2
Press to display the audio function
AUDIO
names.
Press repeatedly to switch between the
AUDIO
following audio functions:
(balance adjustment)—
FADER
curve fine adjustment)—
(treble)— (loudness)—
LOUD
output)— (subwoofer setting
80HZ0
adjustment)— (source level adjustment)
SLA
• When selecting the FM tuner as the source,
you cannot switch to
SLA
• To return to the display of each source, press
.
BAND/ESC
Notes
• If you do not operate the audio function within
about 30 seconds, the display is automatically
returned to the source display.
• Audio Menu functions change depending on
the rear output setting in the Initial Setting
Menu. Refer to Switching the rear output set-
ting on page 36.
(equalizer
EQ
(bass)—
BASS TRE
(subwoofer
SUB.W
.