Responding To The Tp Alarm; Using Pty Functions; Using News Program Interruption; Receiving Pty Alarm Broadcasts - Pioneer KEH-P6020RB Bedienungsanleitung

Section
RDS
04
Notes
• You can also turn the
pressing
FUNCTION.
• The system switches back to the original
source following traffic announcement recep-
tion.
• TA can be activated from sources other than
the tuner if the tuner was last set to the FM
band but not if it was last set to the MW/LW
band.
• If the tuner was last set to FM, turning on TA
lets you operate other tuning functions while
listening to sources other than the tuner.
• Only TP and enhanced other network's TP
stations are tuned in during seek tuning or
BSM when TA is on.

Responding to the TP alarm

When a TP or enhanced other network's TP
station is lost due to a weak signal the
cator is extinguished and a series of short
beeps, about five seconds long, sound to
remind you to select another TP or enhanced
other network's TP station.
When listening to the tuner, tune in another
TP or enhanced other network's TP station
• When listening to sources other than the
tuner the unit will automatically seek out a TP
station with the strongest signal after a 10- or
30-second delay. The delay is 10 seconds if TA is
on and 30 seconds if TA and AF are on.
16
En
function on or off by
TA
indi-
TP
.

Using PTY functions

You can tune in a station by using PTY informa-
tion.

Using news program interruption

When a news program is broadcast from a PTY
code news station the unit can switch from any
station to the news broadcast station. When the
news program ends, reception of the previous
program resumes.
Press and hold to turn on news program
TA
interruption.
Press until appears in the display.
TA NEWS
• To turn off news program interruption, press
and hold until
TA NEWS
display.
Note
• You can also turn on or off news program
interruption by pressing

Receiving PTY alarm broadcasts

PTY alarm is a special PTY code for announce-
ments regarding emergencies such as natural
disasters. When the tuner receives the radio
alarm code, appears on the display and
ALARM
the volume adjusts to the TA volume. When the
station stops broadcasting the emergency
announcement, the system returns to the previ-
ous source.
• An emergency announcement can be can-
celled by pressing .
TA
disappears from the
FUNCTION.