JVC KD-DV7401 Bedienungsanleitung Seite 65

• The iPod does not turn on or does not work. • Check the connecting cable and its connection.
• The sound is distorted.
• "Disconnect" appears on the display.
• Playback stops.
• No sound can be heard when connecting an
iPod nano.
• "No File" appears on the display.
• "Reset 01" – "Reset 07" appears on the
display.
• "Reset 08" appears on the display.
• The iPod's controls do not work after
disconnecting from this unit.
• Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby
Laboratories.
• "DTS" and "DTS Digital Out" are registered trademarks of DTS, Inc.
• "DVD Logo" is a trademark of DVD Format/Logo Licensing Corporation registered in the US, Japan and other
countries.
• DivX, DivX Ultra Certified, and associated logos are trademarks of DivX, Inc. and are used under license.
• Official DivX® Ultra Certified product
• Plays all versions of DivX® video (including DivX® 6) with enhanced playback of DivX® media files and the DivX®
Media Format
• Microsoft and Windows Media are either registered trademarks or trademarks of Microsoft Corporation in the
United States and/or other countries.
• The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Victor
Company of Japan, Limited (JVC) is under license. Other trademarks and trade names are those of their respective
owners.
• iPod is a trademark of Apple Inc., registered in the U.S. and other countries.
• This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual
property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended
for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or
disassembly is prohibited.
Symptom Remedy/Cause
• Update the firmware version.
• Charge the battery.
Deactivate the equalizer either on this unit or the iPod.
• Check the connecting cable and its connection.
• Charge the battery.
The headphones are disconnected during playback.
Restart the playback operation (see page 37).
• Disconnect the headphones from the iPod nano.
• Update the firmware version of the iPod nano.
No tracks are stored. Import tracks to the iPod.
Disconnect the adapter from both this unit and iPod.
Then, connect it again.
Check the connection between the adapter and this unit.
Reset the iPod.
REFERENCES 65