Storing Your Own Sound Modes - JVC KD-DV7401 Bedienungsanleitung

* If "Off" is selected in step
adjust the subwoofer phase.
C
Hi Pass (Hi Pass Filter)
Turn the control dial to select the cutoff
frequency to the front/rear speakers. Set this
to match the LPF setting.
• Off: All signals are sent to the front/rear
speakers.
• 62Hz: Frequencies lower than 62 Hz are
cut off.
• 95Hz: Frequencies lower than 95 Hz are
cut off.
• 135Hz: Frequencies lower than 135 Hz are
cut off.
D
VolAdjust, [–5 to +5]
Turn the control dial to adjust the input level
of each source (except FM).
Adjust to match the input level of the FM
sound level.
• Before making an adjustment, select the
source you want to adjust.
E
Loudness, [Off or On]
Turn the control dial to select "Off" or
"On." When "On" is selected, low and high
frequencies sound are boosted to produce a
well-balanced sound at low volume level.
4
Exit from the setting.

Storing your own sound modes

You can adjust the sound modes and store your own
adjustments in memory.
• When is shown on the display, you can
move back to the previous screen by pressing number
button 6.
1
2
Select a sound mode.
44
2 3
, you can only
4
5
6
Preset value setting for each sound mode
Sound
mode
USER
ROCK
CLASSIC
POPS
HIP HOP
JAZZ
Select a frequency range to adjust.
Adjust the sound elements of the selected
frequency range.
4 ¢
1
Press /
frequency band, then press
enhanced level for the selected frequency
band. [–6 to +6]
2
Press number button 5 (
the control dial to select the frequency.
3
Press number button 5 (
the control dial to select the quality slope (Q).
Repeat steps 3 and 4 to adjust the other
frequency bands.
Store the adjustments.
Preset value
0 0
+3 +2
+2 +2
0 +1
+4 +1
+3 +2
to select the
5 ∞
/ to
), then turn
), then turn
0 0 0
0 +1 +1
0 +1 0
0 +1 +2
–2 0 +1
+1 +2 +2