Technical Characteristics - Emos St201 Bedienungsanleitung

Reference to display screen
LCD indicators
Day of week indicator
Clock display
Temperature display
Temperature scale indicator
Program indicator
Comfort indicator
Econ indicator
Function
Display day of week
Display clock, time and other
information
Displays room-temp, set-temp and
other information
"°C" for Celsius / "°F" for Fahrenheit
Indicates that the thermostat is ope-
rating in Program mode and display
the setting
Indicates that the current set-temp
is Comfort
Indicates that the current set-temp
is Econ
30
LCD indicators
Defrost mode indicator
Setback indicator
Heat mode indicator
Cool mode indicator
Program override indicator
Lobat indicator

Technical Characteristics

Pulse Width Modulation (PWM)
ST201 off ers Pulse width modulation control that enables a set point temperature to be
maintained in a precise and convenient way. In the case of under fl oor heating, the du-
ration of opening for the valve actuator is regulated by comparing continuously the set
point temperature with the actual temperature. In this way, the room temperature can
reach the set temperature with minimal temperature deviation. Subsequently, the room
temperature is constantly maintained via the PWM control. In the case of ST201 is used
with radiator or convector heating system, PWM can be switched off if necessary.
Setback Temperature
ST201 has setback temperature function. Once the setback button is activated, the set
point temperature is 3 °C or 6 °F lower than the Econ set-temp. For example, if the Econ
set-temp is at 22 °C, then the setback temperature is 19 °C. Press green button to toggle
between normal set-temperature and setback function, icon
as below to indicate that the setback function is activated.
Function
Indicates that the current set-temp
is Defrost
Indicates that the current set-temp
is Setback
Indicates the thermostat is operating
in heat mode
Indicates operating in cool mode/ A
rotating fan animate if cooling is turn
on/ Outside circle and center dot fl ash
in off mode
Indicates program is overridden
Indicates battery is low
will fl ash and animate
31