Troubleshooting - Klarstein Simplica Benutzerhandbuch

EN
28

TROUBLESHOOTING

Fault
Light on, but motor does
not work.
Light does not work, motor
does not work.
Oil leakage.
Vibration.
Insufficient suction.
Possible Cause
The leafs are blocked.
The capacitor is damaged. Replace the capacitor.
The motor is damaged.
The internal wiring of
motor is cut off /
disconnected. An
unpleaseant smell
may be produced.
The light is damaged.
The plug is loose.
Outlet and the air
ventilation entrance are
not tightly sealed.
Leakage from the
connection of the
U-shaped section and the
cover.
The blade, if damaged,
can cause vibrating.
The motor is not tightly
fastened.
The range hood is not
tightly fixed.
The distance between
the range hood and the
cooker top is too large.
Too much ventilation from
open doors or windows.
Solution
Get rid of the blocking.
Replace the motor.
Replace the motor.
Replace the lights.
Insert the plug firmly into
the socket.
Take down the outlet and
seal it with glue.
Take the U-shaped section
down and seal it with
soap or paint.
Replace the blade.
Fasten the motor tightly.
Fix the range hood tightly.
Readjust the distance.
Choose a new place
to install the appliance
or close some doors /
windows.