Technical Data - SOMFY Sonesse 40 io Anleitung

EN
3.4.2. Adding/Deleting Somfy control points and sensors
Refer to the corresponding guide.
3.4.3. Replacing a lost or broken Somfy control point
To replace a lost or broken control point, contact a drive and home automation professional.

4. TECHNICAL DATA

Power supply
Radio frequency
Frequency bands and maximum power used
Operating temperature
Index protection rating
Safety level
Maximum number of
sensors
For more information about the technical data relating to this drive, please contact a Somfy representative.
We care about our environment. Do not dispose of the appliance with the household waste. Take it to an
approved collection point for recycling.
As the manufacturer, SOMFY ACTIVITES SA, F-74300 CLUSES hereby declares that the drive covered by these
instructions, marked for an input voltage of 230V
compliance with the essential requirements of the applicable European directives, in particular the Machinery Directive
2006/42/EC and the Radio Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at www.somfy.com/ce.
Antoine Crézé, Head of Certifi cation, on behalf of the Activity Director, Cluses, 05/2018.
16
control points and associated
230V 50Hz
868-870 MHz io-homecontrol®, two-way tri-band
868.000 MHz - 868.600 MHz
868.700 MHz - 869.200 MHz
869.700 MHz - 870.000 MHz
0°C to + 60°C
IP 31
Class II
12
and used as intended according to these instructions, is in
~50Hz
Copyright 2018 SOMFY ACTIVITES SA, Société Anonyme. All rights reserved.
©
Sonesse 40 io
e.r.p. <25 mW
e.r.p. <25 mW
e.r.p. < 25 mW