JVC KW-AVX72DT Bedienungsanleitung Seite 72

Symptom
• Bluetooth device does not detect the
unit.
• The unit does not detect the
Bluetooth device.
• The unit does not make pairing with
the Bluetooth device.
• Echo or noise occurs.
• Phone sound quality is poor.
• The sound is interrupted or skipped
while using a Bluetooth audio player.
• "NEW DEVICE" cannot be selected for
"Bluetooth AUDIO."
• The connected audio player cannot
be controlled.
• "No Disc" appears on the screen.
• "No Magazine" appears on the
screen.
• "Cannot play this disc Check the disc"
appears on the screen.
• "Reset08" appears on the screen.
• "Reset01" – "Reset07" appears on the
screen.
• The CD changer does not work at all. Reset the unit. (
72
Remedy/Cause
This unit can be connected with one Bluetooth cellular phone
and one Bluetooth audio player at a time.
While connected to a device, this unit cannot be detected from
another device. Disconnect currently connected device and
search again.
• Check the Bluetooth setting of the device.
• Search from the Bluetooth device.
• Enter the same PIN code for both the unit and target device. If
the PIN code of the device is not indicated on its instructions,
try "0000" or "1234."
• Select the device name from <Special Device>, then try to
connect again. ( 37)
Adjust the microphone unit (supplied with Bluetooth Adapter)
position.
• Reduce the distance between the unit and the Bluetooth
cellular phone.
• Move the car to place where you can get a better signal
reception.
• Reduce the distance between the unit and the Bluetooth
audio player.
• Disconnect the device connected for "Bluetooth PHONE."
• Turn off, then turn on the unit.
• (When the sound is not yet restored,) connect the player again.
Bluetooth audio player is already connected. To select "NEW
DEVICE," disconnect it. (
Check whether the connected audio player supports AVRCP
(Audio/Video Remote Control Profile).
Insert a disc into the magazine.
Insert the magazine.
Current disc does not include playable files. Replace the disc
with one including playable files.
Connect this unit and the CD changer correctly and press the
reset button of the CD changer.
Press the reset button of the CD changer.
3)
37)