JVC KW-AVX72DT Bedienungsanleitung Seite 71

Symptom
• No picture appears on the external
monitor.
• "Eject Error" or "Loading Error"
appears on the screen.
• "Region code error" appears on the
screen when you insert a DVD Video.
• Disc cannot be played back.
• Noise is generated.
• Tracks are not played back as you
have intended them to play.
• Elapsed playing time is not correct.
• "Not Support" appears on the screen
and track skips.
• Noise is generated.
• Tracks cannot play back as you have
intended them to play.
• "Now Reading..." keeps flashing on
the screen.
• "Cannot play this device Check the
device" appears on the screen.
• Correct characters are not displayed
(e.g. album name).
• While playing a track, sound is
sometimes interrupted.
Remedy/Cause
• Connect the video cord correctly.
• Select the correct input on the external monitor.
Reset the unit. ( 3)
Region code is not correct. (
• Change the disc.
• Record the tracks using a compliant application on the
appropriate discs. (
• Add appropriate extension codes to the file names.
The track played back is not a playable file format. Skip to
another file.
Playback order may differ from the one played back using other
players.
This sometimes occurs during playback. This is caused by how
the tracks are recorded.
The track is unplayable.
The track played back is not a playable file format. Skip to
another file.
Playback order may differ from the one played back using other
players.
• Readout time varies depending on the USB device.
• Do not use too many hierarchy and folders.
• Turn off the power then on again.
No tracks are stored. Copy tracks to the USB device.
For available characters,
The tracks are not properly copied into the USB device. Copy
tracks again, and try again.
40)
40)
66.
Continued on the next page
REFERENCES 71