JVC KW-AVX72DT Bedienungsanleitung Seite 18

Menu item
Start Auto
Scan
Service List
Bandwidth
Frequency
Scan Mode
Scan Option
Start Manual
Scan
18
Selectable setting/item
• Frequency : Searching frequency.
• Bandwidth : Searching bandwidth.
• TV Channels : Number of TV channels available.
• Radio Channels : Number of radio channels available.
• Signal Quality : As the bar and percentage increases, the signal
• Scanning Progress : Shows the scanning progress. When scanning
Select a service list to store programs.
♦
Service List 01 – 20
Select an appropriate bandwidth.
♦
7MHz, 8MHz
Select a frequency channel for searching.
♦
Channel 5 – Channel 12 (7 MHz), Channel 21 – Channel 69 (8 MHz)
♦
Replace : Select to replace the programs of the selected
♦
Clear : Select to clear and add the programs of the selected
♦
Add : Select to add programs at the end of the existing
Select the service/channel type shown on the service/channel list.
♦
FTA SD : Only supported Free To Air Standard service/
♦
All : All service/channels scanned will be listed including
The unit search for programs by the specified frequency and bandwidth
selected.
• When scanning reached 100%, scan completed. The first channel of the
selected service is shown.
• "Error/Warning" appears on the screen if:
– Both the storage of TV and Radio Service List is full.
– The storage of TV Service List is full.
– The storage of Radio Service List is full.
quality becomes stronger.
reached 100%, scan completed. The first channel of
the selected service is shown.
• "Error/Warning" appears on the screen if:
– Both the storage of TV and Radio Service List is
full.
– The storage of TV Service List is full.
– The storage of Radio Service List is full.
service list.
service list.
service/channel of the selected service list.
channels will be listed.
the unsupported service/channels.