Functions Of The Remote Control; Changing The Battery - Bosch DAF Radio Basic Bedienungs- Und Einbauanleitung

IR remote control

Functions of the remote control

General:
Button Function
⑮
Long press: Switch the device
on/off
Short press: Volume mute
⑯
SRC Switch between sources
VOL + ⑭
Increase the volume
VOL – ⑬
Decrease the volume
⑫
OK Open or close the menu
In radio mode:
Button Function
⑱
Short press: Automatic station
seek tuning / PTY seek tuning /
manual station tuning / scan
stored station presets
Long press: Change the
frequency quickly
⑰
Short press: Automatic station
seek tuning / PTY seek tuning /
manual station tuning / scan
Robert Bosch Car Multimedia GmbH
stored station presets
Long press: Change the
frequency quickly
Note:
The function that is activated when
you press the
must be selected in the menu
(please refer to the section entitled
"Button function programming" in
the "Radio mode" chapter).
USB (MP3) mode
Button Function
⑱
Short press: Select the next
track
Long press: Search forwards
⑰
Short press: Select the previous
track
Long press: Search backwards
⑲
Play the next directory
⑳
Play the previous directory
⑫
OK
Activate the scan (long press)

Changing the battery

To change the battery in the IR remote control,
u unlatch the battery compartment ㉑ by
pressing the release lever on the battery
compartment.
u Remove the battery compartment ㉑ from
the housing.
u Remove the old battery and insert the
new battery (CR2025, 3 V) in such a way
that the positive pole faces towards the
rear of the housing when the battery
compartment ㉑ is pushed in.
7 620 000 111/ 7 620 002 112 | 12.2019
en | 47
button ⑥
or