Usb (Mp3) Mode; Preparing A Usb Storage Device; Activating Mp3 Mode; Displaying The Elapsed Or Remaining Playing Time - Bosch DAF Radio Basic Bedienungs- Und Einbauanleitung

USB (MP3) mode

USB (MP3) mode
You can connect USB storage devices to this
device and play MP3/WMA files that are stored
on the USB device.
This chapter only refers to the playback of MP3
files since the method of operation for MP3
and WMA files is identical. In this chapter, the
term "MP3 storage device" refers to USB stor-
age devices like USB flash drives.
Notes:
It is not possible to play WMA files
u
with Digital Rights Management
(DRM) from online music stores in
this device.
WMA files can only be played
u
reliably if they were created with
Windows Media Player version 8
or higher.

Preparing a USB storage device

In order for the device to be able to recognise
a USB storage device, the following require-
ments must be met: the USB storage device
must be specified as a mass storage device, it
must be formatted with the FAT16 or FAT32
file system, and it must contain MP3 or WMA
files.
You can store a maximum of 32,000 tracks
(without ID3 tags) on a USB storage device.
You can use this device to access the directo-
ries and tracks individually. If you use tracks
that have ID3 tags, this maximum number of
files will be reduced.
Robert Bosch Car Multimedia GmbH
Bosch cannot guarantee that all the USB stor-
age devices available on the market will work
properly.

ID3 tags

MP3 tracks can contain additional information
such as the artist, track name, and album (ID3
tags). This device is able to display version 1
and version 2 ID3 tags in the display ④.

Activating MP3 mode

Connecting a USB storage device
and activating MP3 mode
In order to be able to connect a USB storage
device, (e.g. a USB flash drive or USB hard disk
drive), the USB cable must be connected to
the mini-USB port on the rear panel.
u Connect the USB storage device to the
USB cable.
As soon as a USB storage device is connected,
it can be selected using the SRC button ⑩.
"USB" then appears in the display ④.
Displaying the elapsed or remain-
ing playing time
To switch between displaying the elapsed play-
ing time (ELAPSED) and the remaining playing
time (REMAIN) for the current track,
u press the 6 button ⑧.

Displaying track information

(ID3 tags)
If the MP3 storage device makes ID3 tags
available, the information is displayed once in
the display ④ as scrolling text for each track
at the start of the track. If no ID3 tags were
7 620 000 111/ 7 620 002 112 | 12.2019
en | 43