Using As A Speakerphone; Other Functions; Voice Guidance; Voice Control Function - Yamaha NX-P100 Bedienungsanleitung

USING AS A SPEAKERPHONE

By connecting a handsfree-ready device, such as a mobile phone, via Bluetooth connection, you can talk with your hands free through
the microphone and speaker of this unit.
1

OTHER FUNCTIONS

Voice guidance

When pressing the (Talk) button, you will obtain voice
information about a remaining battery level of this unit, etc.

Selecting a language
When this unit is turned on the power without a Bluetooth
connection, you can select a language by pressing the
(Volume – or +) button while pressing the
When you select a language, it will be announced by voice (if the
voice guidance is disabled, a beep will sound instead).
For selectable languages, please see "SPECIFICATIONS" (☞ P. 13).
9
2

Voice control function

When a device with Siri or other voice control function is
connected via Bluetooth connection, hold down the
button on this unit (about 1 second) to enable voice control of the
device from this unit. For details, please refer to the instructions
of the device.
or
(Talk) button.
May not function with some voice control applications.

Auto power off

If this unit has been on without a Bluetooth connection, AUX, or
USB with your PC nor any operation for ten minutes, the power
of the unit will be turned off automatically.
1.
Connect the handsfree-ready device
to this unit via Bluetooth connection
(☞ P. 4).
2.
When your phone rings, press the
(Talk) button on this unit.
A handsfree talk will begin. To finish it, press
the (Talk) button once again.
(Talk)