Controls And Functions; Front Panel - Yamaha NX-B55 Bedienungsanleitung

1
Headphones connector (3.5 mm stereo mini jack)
Use for a headphones connection.
When headphones are connected, sound is not output through the speakers.
Notes
To protect your hearing, make sure that the volume is low before headphones are
used.
• Do not use headphones with a loud volume for a long time. Otherwise, your
hearing may be damaged.
• Make sure that the volume of the audio devices is at minimum before
headphones are connected. A sudden loud sound may damage your hearing.
2
VOL (volume) control
Controls the volume of the speakers and the headphones.
The volume becomes louder as the VOL (volume) control is rotated to
the right, and quieter as it is rotated to the left.
Loudness control
The Loudness control function of the speakers allows you to enjoy rich
bass tone sounds even at low volumes.
The function automatically corrects for optimum sound, depending on
the unit's output level.
Adjust the output sound level as follows;
a After you connect an external device to this unit, turn on the power of this unit
and then rotate the VOL (volume) control to the 2 o' c lock position (see the
illustration below).
b Adjust the volume of the external device to the loudest level
before the onset of distortion.
For details about external devices, see their instruction
manuals.
c Rotate the VOL (volume) control of this unit to adjust the
volume to the desired level.
1
En

Controls and functions

Front panel

R speaker (Right)
(On the right side when
facing the front of the
speakers.)
a
b
c
L speaker (Left)
(On the left side when
facing the front of the
speakers.)