Listening To Dab Stations (Isx-803D) - Yamaha ISX-803 Bedienungsanleitung

LISTENING TO DAB STATIONS (ISX-803D)

DAB (Digital Audio Broadcasting) and DAB+ use digital signals for clearer sound and more stable reception compared to analog signals.
DAB+ is based on the original DAB standard but uses a more efficient audio codec.
DAB and DAB+ are broadcast in blocks of data called "ensembles" containing up to several radio stations that are simultaneously broadcast.
DAB and DAB+ can also include an extensive amount of text information, enabling you to select a station by name.
Other information, such as the ensemble name or the status of the digital signal, can be displayed on the DAB information display.
"DAB" described in this manual may also refer to "DAB+".
Preparing for DAB reception
Before tuning into DAB stations, an initial scan must be performed. When you select the DAB for the first time, the initial scan is performed
automatically.
Top panel
SOURCE + BEEP
AUTO 2 SET 2 BEEP
1 1 SOURCE
CLOCK
DIMMER ALARM TYPE
LABEL SIDE
SOURCE ALARM SNOOZE SLEEP PRESET
1
Tuning DAB stations
Top panel
AUTO
1
DIMMER
USB
VOLUME SOURCE ALARM
1
1
2 SET 2 BEEP SOURCE + BEEP
1
SOURCE
CLOCK ALARM TYPE
LABEL SIDE
SNOOZE SLEEP PRESET
2
1
Press SOURCE and set DAB as the playback source.
The initial scan starts. During the scan, the degree of progress
is displayed on the DAB information display.
Scan is completed.
"Completed" and the number of receivable DAB stations
appear on the DAB information display.
Using the remote control
Press RADIO to switch between DAB/FM.
Note
• To perform the initial scan manually, press and hold PRESET for
more than 4 seconds and then press PRESET when the scan starting
screen is displayed.
• If the initial scan is performed, stored DAB station information and
preset DAB stations are cleared.
1
Press SOURCE and set DAB as the playback source.
2
Press / to tune the DAB station.
Using the remote control
Press TUNING
While receiving DAB, switch on the DAB information display.
When the unit does not receive a DAB signal, "Off Air" is
displayed instead of the DAB station name.
1
a Signal strength indicator:
Shows current signal strength.
b Secondary indicator:
Some stations have sub (secondary) stations. If a
secondary station is playing, the secondary indicator is
displayed.
c DAB station name
d DAB station Information (☞ P. 14)
/
2
3
4
13
En