Yamaha ISX-803 Bedienungsanleitung Seite 20

USING THE ALARM FUNCTION
Set the alarm time and alarm type
Top panel
AUTO
DIMMER
USB
VOLUME SOURCE ALARM
6 4 17
Note
The alarm setting will be erased if the system enters standby mode without
properly completing it.
1
Press and hold ALARM.
The alarm indicator (
2
Press to set the alarm time.
/
Using the remote control
Press / .
3
Select the alarm type with the ALARM TYPE
switch on the rear panel.
For details on alarm types, refer to P. 17.
Rear panel
18
En
SOURCE + BEEP
2 SET 2 BEEP
1 1 SOURCE
CLOCK ALARM TYPE
LABEL SIDE
SNOOZE SLEEP PRESET
5 2
) and set alarm time will flash.
Alarm time
Alarm indicator
SOURCE+
BEEP
BEEP
SOURCE
4
(when alarm types other than BEEP are selected)
Press SOURCE to select music source.
Sources other than AUX and Bluetooth can be selected.
Using the remote control
Press the USB, CD, or RADIO button to select the
music source.
Notes
• If CD/USB has been selected, connect/insert the audio source (audio/
data CD, USB device) to the unit.
• If source cannot be played back at the time set for the alarm (eg. CD
is not inserted), the beep sound is played back.
5
(when alarm types other than BEEP are selected)
Specify the track, folder or radio station to be
played.
Press PRESET to select the track (audio CD), folder (data
CD/USB device) or radio station to be played.
Using the remote control
Press PRESET
y
When "0" is set, the playback resumes from the track/radio station you
listened to last time (resume).
6
Set the alarm volume by pressing VOLUME –/+.
7
Press ALARM to complete setting the alarm.
The alarm will be set, and the alarm indicator (
light up.
/ .
Alarm volume
) will