Listening To Fm Stations; Selecting An Fm Station; Display Information; Displaying Radio Data System Information - Yamaha TSX-132 Bedienungsanleitung

Selecting an FM station

Connect the antenna if you want to listen to the FM (☞ P. 3).
1
FM RADIO
AUX USB
CD iPod

Display information

If you press DISPLAY on the remote control, the information shown on the front panel display will be switched in the
following order.
Preset number and frequency
* Examples of reception status indication.
TUNED/STEREO: A strong FM stereo broadcast is being received.
TUNED/MONO: Receiving an FM broadcast in monaural (even if the FM broadcast is stereo, reception will be
monaural if the signal is weak).
Not TUNED: No broadcast is being received.

Displaying Radio Data System information

If you press DISPLAY on the remote control while Radio Data System information is
being received, the information shown on the front panel display will be switched in the
order shown at right.
If the signal transmission of the Radio Data System station is too weak, this unit may not be able to
receive Radio Data System information completely. In particular, RT (Radio Text) information uses a
lot of bandwidth, so it may be less available compared to other types of information.

LISTENING TO FM STATIONS

2
Reception status*
1 Press the FM source button to switch the
audio source to FM.
2 Tuning FM stations.
Automatic tuning: Press and hold TUNING
Manual tuning: Press TUNING
If you tune to a station manually while receiving FM, the
sound will be monaural.
/ .
/ repeatedly.
PS (Program Service)
PTY (Program Type)
RT (Radio Text)
CT (Clock Time)
Reception status
Preset number and
frequency
9
En