Inserting/Replacing The Batteries - Silvercrest SLS 3 A1 Bedienungsanleitung

CAUTION – PROPERTY DAMAGE!
Never submerse the appliance in
►
water or other liquids .
Defective components must always
►
be replaced with original replace-
ment parts . Compliance with safety
requirements can only be guaran-
teed if original replacement parts
are used .

Inserting/replacing the batteries

NOTE
► Always use 1 .5 V, AAA type batteries .
► Pay attention to the correct polarity when inserting
the batteries 0 .
1) Turn the lock 8 a quarter turn .
2) Now pull off the battery compartment cover 7 together
with the lock 8 .
3) If inserted: Remove the discharged batteries 0 from the
battery compartment 6 .
4) Insert new batteries 0 as shown in the polarity diagram
in the battery compartment 6 .
5) Push the battery compartment cover 7 back onto the
appliance and turn the lock 8 back .
The battery compartment 6 is now closed .
■ 6 │ GB │ IE │ NI
SLS 3 A1