Overview - Sony CA-702 Bedienungsanleitung

Overview

Pool Feed Function
VTR START button
SDI inputs and outputs
Various power supply capabilities
The CA-702/702P Camera Adaptor attaches to the DNW-7/7P/9/9P/9WS/
9WSP/90/90P/90WS/90WSP Digital Camcorder, DNV-5 Recorder Unit,
or DVW-700/700P/700WS/700WSP Digital Betacam Camcorder to allow
the connection of a portable VTR through a camera cable (BVW-50/50P/
DVW-250/250P).
When attached to a DNW-7/7P/9/9P/9WS/9WSP/90/90P/90WS/90WSP,
the CA-702/702P allows the camcorder to record a video signal
(composite or SDI (serial digital interface)) from an external VTR (Pool
Feed function). The CA-702/702P has the following features:
When attached to a DNW-7/7P/9/9P/9WS/9WSP/90/90P/90WS/90WSP,
the CA-702/702P allows the camcorder to record a video signal
(composite or SDI) from an external VTR.
The CA-702/702P simultaneously outputs an active-through signal from
the VIDEO/SDI OUT connector for recording on other external
camcorders.
The CA-702/702P is provided with a VTR START button that controls
synchronized operations on the camcorder and an attached portable VTR,
or merely controls recording operations on the camcorder when used
alone.
The CA-702/702P comes with serial digital video/audio input and output
connectors that allow not only full monitoring of recorded video and audio
signals but also recording on the camcorder itself.
When the SDI/COMPOSITE switch is set to SDI, the VIDEO IN/OUT
connectors support the transmission of SDI signals.
• Power supplied to the DC IN connector on the CA-702/702P can be used
to power the camcorder.
• Power from the DC OUT connector on the CA-702/702P can be used to
power other equipment such as the WRR-860A UHF Synthesized
Diversity Tuner.
3(E)