Overview; Battery Backup - Sony AC-DN1 Bedienungsanleitung

Overview

The AC-DN1 functions as an AC
adaptor and battery charger when
attached to portable devices, such as
digital Betacam camcorders.
The AC-DN1 has following features:
Maximum power supply of
38W DC
The AC-DN1 supplies a maximum of
38W to devices that use the BP-L60A/
L90A Lithium-Ion Battery Pack, and a
maximum of 16.8V, 2.26A to devices
that use the NP-1B/1A or NP-90A/90
Nickel-Cadmium Battery Pack and
with a maximum voltage rating of
17V.
Battery charging of about
85% capacity
The AC-DN1 can be used to charge a
BP-L60A/L90A Lithium-Ion Battery
Pack, attached using an optional
BKW-L601/2 Battery Adaptor, to
about 85% capacity.
Note
Operating a camcorder or other device
while charging the battery with the
AC-DN1 may cause excessive power
consumption and overheating in the
AC-DN1. Therefore, you should
never charge a battery while using it to
operate a device.

Battery backup

Should the AC power cord be
accidentally unplugged from the AC
power source, a charged BP-L60A/
L90A Lithium-Ion Battery Pack
attached to the AC-DN1 provides an
alternate back-up power to the
connected device.
90° rotatable AC IN connector
The AC IN connector is designed to
be rotated up to 90° to allow
convenient orientation of the AC
power cord.
Note
For information on changing the angle
of the AC IN connector, please consult
Sony service personnel.
3 (E)