Operation
Switching off the actuator (receiver)
Personal:
•
User
Switching on/off
1.
Press and hold the manual switch (Fig. 1/2) for five seconds until the green LED lights up.
2.
Press and hold the manual switch (Fig. 1/2) for five seconds until the green LED goes out.
Manual operation
3.
Press the manual switch (Fig. 1/2) briefly to switch ON/OFF.
The system ON/OFF LED lights up red.
ð
In the event of faults or poor radio communication, you can operate
using the manual switch (Fig. 1/2) only if radio communication has been
interrupted.
EN
49