Grasslin thermio essential RecUno/2 Bedienungsanleitung Seite 39

Assembling the actuator (receiver)
Fig. 2: Installing the housing base on the wall mounting housing
Installation in a flush-mounted socket without wall-plugs and with wall mounting housing
On-wall mounting
3. Pull the wires through the wall mounting housing.
4. Fasten the wall mounting housing to the wall-plugs with the screws (3.5 x 25 mm) (Fig. 2).
Removing the housing cover
5. Undo the screw on the device housing with the Phillips screwdriver.
without wall mounting housing and with wall-plugs
EN
39