Concept VZ 1230 Bedienungsanleitung Seite 28

OPERATION MANUAL
Hair conditioning
- Wash your hair and dry well.
- Comb your hair properly. Do not use hair lacquer and/or any other hair care
chemical preparations.
- Wear a towel around your neck to prevent possible burning.
Appliance switching on
- Use lock (Fig. 1) to open the appliance.
6
- Insert the plug into the electric socket and switch the appliance by holding the switch
. ON/OFF (Fig. 2).
5
- The temperature indicators 1 - 3 will light up immediately.
- The fourth indicator keeps flashing until the preset temperature 160 °C (Fig. 3) is
reached.
The preset temperature is reached after ca. 1 minute.
Fig. 1
Temperature adjustment
Set temperature suitable for your hair type, see the recommended values below!
Setting lower temperatures
- Press repeatedly the button
- Minimum temperature is 100°C.
Setting higher temperatures
- Press repeatedly the button
- Maximum temperature is 200°C.
Note!
For each newly selected temperature the corresponding indicator keeps flashing until
the desired temperature is reached. Increase of temperature is reached within several
seconds, its decrease takes a longer time.
VZ 1230
Fig. 2
(symbol -) to adjust the required temperature.
7
(symbol +) to adjust the required temperature.
7
5
Fig. 3
UK
27