Installation Steps; Package Contents; Optional Accessories - Axis Q1615 Mk II Installationsanleitung

This Installation Guide provides instructions for installing AXIS Q1615 Mk II Network Camera on your
network. For other aspects of using the product, see the User Manual available at www.axis.com

Installation Steps

1. Make sure the package contents, tools and other materials necessary for the installation
are in order. See page 9.
2. Study the product overview. See Product overview on page 10
3. Study the specifications. See page 16.
4. Install the hardware. See page 18.

Package contents

• AXIS Q1615 Mk II Network Camera
• 2–pin connector block for power input
• 4–pin I/O connector block for connecting external devices
• 2–pin RS485/422 connector block (x2)
• Camera stand
• Torx screwdriver T20
• Printed materials
- Installation Guide (this document)
- Extra serial number label (x2)
- AVHS Authentication key

Optional Accessories

For information about available accessories, including power accessories and outdoor housings
see www.axis.com
AXIS Q1615 Mk II Network Camera
9
EN