Installation Steps; Package Contents; Recommended Tools - Axis P12 Serie Installationsanleitung

Installation Guide
This Installation Guide provides instructions for installing AXIS P12 Network Camera on your
network. For other aspects of using the product, see the User Manual available at www.axis.com

Installation Steps

1. Make sure the package contents, tools and other materials necessary for the installation
are in order. See page 9.
2. Study the hardware overview. See page 10.
3. Study the specifications. See page 15.
4. Install the hardware. See page 17.
5. Access the product. See page 26.

Package Contents

• Network camera
- Main unit
- Sensor unit AXIS P1204/AXIS P1214/AXIS P1214-E/AXIS P1224-E
• Connectors
- 2-pin power terminal block
- 4 pin I/O connector block
• Mounting accessories
- All variants: Mounting rail
- AXIS P1204: Straight mounting bracket, angled mounting bracket, cover
- AXIS P1214/AXIS P1224-E: Mounting bracket
- AXIS P1214-E: Mounting bracket, outdoor housing
• Printed materials
- AXIS P12 Series Installation Guide (this document)
- AVHS Authentication key

Recommended Tools

• Drill – if using the hard ceiling mount
• Knife – if using the drop ceiling mount
• Torx screwdriver T30 – if using a compatible bracket from AXIS T91A Mounting
Accessories
AXIS P12 Network Camera Series
9