Connection Diagrams - Axis Q1615 Mk II Installationsanleitung

Function button
Note
Focus assistant is only valid for optional P-iris, DC-iris or manual iris lenses.
Use the function button to activate the following functions:
Leveling assistant - This function helps to make sure the camera is level. To start the leveling
assistant, press the button for about 3 seconds. Press again to stop the leveling assistant. The
status LED and buzzer signal assist leveling of the camera, see Status LED behavior and buzzer signal
for leveling assistant on page 12. The camera is level when the buzzer beeps continuously.
Focus assistant - This function is used for enabling the focus assistant. To enable the focus
assistant, press and very quickly release the button. Press again to stop the focus assistant.

Connection Diagrams

I/O Connector
1
0 V DC (-)
2
DC output 12 V, max 50 mA
A
I/O configured as input
B
I/O configured as output
AXIS Q1615 Mk II Network Camera
15
EN