Connection Diagrams; Install The Hardware; Install The Wall Bracket - Axis P13-E Series Installationshandbuch

AXIS P13-E Series

Connection Diagrams

I/O Connector
1
0 V DC (-)
2
DC output 3.3 V, max 50 mA
3
Digital input 0 to max 40 V DC
4
Digital output 0 to max 40 V DC, open drain, 100 mA

Install the Hardware

Install the Wall Bracket

NO TICE TICE
NO NO TICE
• The weight of the camera is 3000 g (6.6 lb). Check that the material is strong enough to
support this weight.
• Always use a shielded network cable (STP) intended for outdoor use between the
Axis product and the end point and ensure that the end point is properly grounded.
Installations of Axis products using a shielded network cable (STP) and a properly
grounded end point have been tested to comply with industry immunity standard levels
such as surge protection. Any other installation method will void the warranty and
leave the unit at a risk.
1
2
3
4
18