Reassembly; Disposal; Annex; Requirements For An Encoder Evaluation Device - Kübler Sendix S3674 Betriebsanleitung

Kübler Group

6.2 Reassembly

Reassembling the device is only permitted under the following conditions:
• the device is undamaged.
• he screws can be newly secured against loosening.
• all safety instructions have been complied with.
• all the steps described in chapter Installation [} 29] have been carried out.

7 Disposal

7.1 Disposal
Always dispose of unusable or irreparable devices in an environmentally sound manner, ac-
cording to the country-specific provisions and in compliance with the waste disposal regulations
in force.
We will be glad to help you dispose of the devices, see Contacts [} 42].
NOTICE
Dispose of disassembled device components as follows:
• Metal components in the scrap metal
• Electronic components in the electrical waste
• Plastic parts in the recycling center
• Sort and dispose of the other components depending on the material type.

8 Annex

8.1 Requirements for an Encoder Evaluation Device

8.2 Approvals

The product meets the following criteria:
• Compliance with the European Directives:
– EMC Directive 2014/30/EU
– RoHS Directive 2011/65/EU
• Compliance with the Chinese Directives:
BA S36xx - R60071.0009 - 01
Environmental damage in case of incorrect disposal
Electrical waste, electronic components, lubricants and other auxili-
ary materials are subject to hazardous waste treatment.Problem sub-
stances and may only be disposed of by licensed specialist compan-
ies.
7 Disposal
EN - 39